Declaraţie de conformitate
DECLARATION OF CONFORMITY
according to ISO/IEC 17050-1 and EN 17050-1
Supplier’s Name:
Hewlett-Packard Company
DoC#: SNPRC-0902-01-A
Supplier’s Address:
138, Depot Road, #02-01
Singapore 109683
declares, that the product
Product Name and Model:
HP Officejet 4500 series printer
Regulatory Model Number:
1)
SNPRC-0902-01
Product Options:
All
Power adaptor:
0957-2269
conforms to the following Product Specifications and Regulations:
SAFETY:
IEC 60950-1:2001 / EN 60950-1:2001 + A11:2004
EN 62311:2008
EMC:
B
s
s
a
l
C
7
0
0
2
:
1
A
+
6
0
0
2
:
2
2
0
5
5
N
E
/
5
0
0
2
:
1
A
+
5
0
0
2
:
2
2
R
P
S
I
C
EN 55024:1998 +A1:2001 + A2:2003
EN 61000-3-2:2006
EN 61000-3-3:1995 +A1: 2001 + A2:2005
FCC CFR 47, Part 15 Class B / ICES-003, Issue 4 Class B
Telecom:
TBR 21: 1998
3)
FCC Rules and Regulations 47CFR Part 68
TIA-968-A-1+A-2+A-3+A-4+A-5 Telecommunications – Telephone Terminal Equipment
CS-03, Part I, Issue 9, Feb 2005
Supplementary Information:
1. This product is assigned a Regulatory Model Number which stays with the regulatory aspects of the design. The
Regulatory Model Number is the main product identifier in the regulatory documentation and test reports, this number
should not be confused with the marketing name or the product numbers.
2. This product complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC
& the R&TTE Directive 99/5/EC and carries the
mark accordingly. In addition, it complies with the WEEE Directive
2002/96/EC and RoHS Directive 2002/95/EC.
3. This product complies with TBR21:1998, except clause 4.7.1 (DC characteristic), which complies with ES 203 021-3,
clause 4.7.1.
4. This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
5. The product was tested in a typical configuration.
Singapore
25 June 2009
Yik Hou Meng
Product Regulations Manager
Customer Assurance, Business Printing Division
Local contact for regulatory topics only:
EMEA: Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany
www.hp.com/go/certificates
USA : Hewlett-Packard, 3000 Hanover St., Palo Alto 94304, U.S.A. 650-857-1501
Informaţii legale
163
DECLARATION OF CONFORMITY
according to ISO/IEC 17050-1 and EN 17050-1
Supplier’s Name:
Hewlett-Packard Company
DoC#: SDGOB-0833-Rev.7.0
Supplier’s Address:
138, Depot Road, #02-01
Singapore 109683
declares, that the product
Product Name and Model:
HP Officejet J4680 and J4624, HP Officejet 4500 Wireless series printer
Regulatory Model Number:
1)
SDGOB-0833
Product Options:
Radio Module
All
RSVLD-0608
Power adaptor:
0957-2269
conforms to the following Product Specifications and Regulations:
SAFETY:
IEC 60950-1:2001 / EN 60950-1:2001 + A11:2004
EN 62311:2008
EMC:
CISPR 22:2005 / EN55022:2006 Class B
EN 55024:1998 +A1:2001 + A2:2003
EN 61000-3-2:2006
EN 61000-3-3:1995 +A1: 2001 + A2:2005
FCC CFR 47, Part 15 Class B / ICES-003, Issue 4 Class B
EN301 489-1 V1.6.1, EN301 489-17 V1.2.1
Telecom:
TBR 21: 1998
3)
FCC Rules and Regulations 47CFR Part 68
TIA-968-A-1+A-2+A-3+A-4+A-5 Telecommunications – Telephone Terminal Equipment
CS-03, Part I, Issue 9, Feb 2005
Supplementary Information:
1.
This product is assigned a Regulatory Model Number which stays with the regulatory aspects of the design. The Regulatory
Model Number is the main product identifier in the regulatory documentation and test reports, this number should not be
confused with the marketing name or the product numbers.
2.
This product complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC & the
R&TTE Directive 99/5/EC and carries the
marking accordingly. In addition, it complies with the WEEE Directive 2002/96/EC
and RoHS Directive 2002/95/EC.
3.
This product complies with TBR21:1998, except clause 4.7.1 (DC characteristic), which complies with ES 203 021-3, clause
4.7.1.
4.
This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
5.
The product was tested in a typical configuration.
Singapore
4 Aug 2009
Yik Hou Meng
Product Regulations Manager
Customer Assurance, Business Printing Division
Local contact for regulatory topics only:
EMEA: Hewlett-Packard GmbH, HQ-TRE, Herrenberger St rasse 140, 71034 Boeblingen, Germany
www.hp.com/go/certificates
USA : Hewlett-Packard, 3000 Hanover St., Palo Alto 94304, U.S.A. 650-857-1501
Anexa A
164
Informaţii tehnice